10 Gauge Power Pole to Power Supply

We manufacture and supply a wide range of power cables for managing and distributing low voltage high current DC.

The cables are designed for connecting equipment to power supplies (Bench units) or batteries such as deep cycle units.

We also have voltage monitors and a PowerPole distribution board - The Outrigger 4



30 inch long, 10 Gauge Red & Black Zip cord. Terminated in spring loaded Croc. clips  on one side and a pair of 10 gauge ring connectors on the other end. Ring connectors have an inside open diameter of 1/2 inch - hence perfect for connecting to  deep cycle battery  terminals.

Order code - ER10CC

18 Gauge Car adapter Y cable

Battery Meter - 10 -14.5 VDC meter

If you need a new 6 Pin female connector cable for your Icom, Yaesu or Kenwood radio, look no further. This high quality cable made with an OEM 6 Pin connector is the answer. AT 6 foot long it is just the right length and it terminates in a 45 Amp PowerPole.

Order code - ER6HF


User Guide Here :

A 12 Volt DC power distribution panel.

Uses 30 Amp PowerPole connectors with Auto blade fused locations.

Aligned in the popular ARES format for ease of use and compatibility.

Like our powerpole Y cable this adapter takes a single source (the car adapter) and splits it out to two powerpole connectors. A great way to run low power devices from one car cigarette adapter socket.

Order code -  ER18CA

Monitoring a power source that discharges. like a battery, it is essential to prevent a flat battery. 

This simple voltmeter displays the state of charge with a colorful bar of led's, when the bar shows green all is well, in the yellow, charge up soon.

Simple and effective.

Order code - ERBVM

14 Gauge 2 into 1 Y Cable

10 Gauge Power Pole to Battery 

2 Foot long, uses 10 gauge Red & Black ZIP cord. Terminated in a 45 amp power pole connector on one side and a pair of 10 gauge ring connectors on the other end. Ring connectors have an inside open diameter of 1/2 inch - hence perfect for connecting to large deep cycle battery terminals.

Order code - ER10LR

PowerPole Distribution - The Outrigger 4

2 Foot long uses 10 Gauge Red & Black Zip cord. Terminated in a 45 Amp Power Pole on one side and a pair of 10 gauge ring connectors on the other end. Ring connectors have an inside open diameter of 1/4 inch - hence perfect for connecting to a bench power supply banana or screw terminals.

Order Code - ER10SR 

10 Gauge Battery rings to Croc. Clips

Power Distribution and Monitoring 

6 Pin HF Radio Connector - 12 gauge

A unique adapter cable that splits a conventional powerpole cable into 2 allowing two devices to be connected to a single source or vice versa.

Made from 14 gauge zip cord, this rugged cable is the answer to many connection dilemmas

Order code - ER14Y